Clutch Squeel

Are ya having a problem with your rig? We'll try to help. Share your tech tips and experiences here. Dr. Billy Glaser, author of the "Unofficial 750 Ural Service Manual" site myural.com, is moderating this section.
Forum rules
Here is the place for you to ask questions about or share your experiences about servicing or repairing your Ural or Dnepr. Please post topics concering modifications or accesories in the "Modifications and Acessories" section. Please post oil related questions in the "Oil Threads" section.
Post Reply
URALNUT60
Comrade Colonel
Comrade Colonel
Posts: 464
Joined: Sat Oct 15, 2016 5:59 pm

Clutch Squeel

Post by URALNUT60 » Sat May 30, 2020 8:39 pm

Just fired motor up after work was done and gearbox bolted back up, thought i made sure release rod was seated in square hole installed donut and final drive, rear wheel not on as bike is on stand i built, when i pull in clutch the squeelling sound starts when i leave it out it stops, seams to shift okay, my reverse shifter type that bolts to top of the motor under the tank, will find neutral just fine doesnt seem to engage reverse, is the squeeling sound coming from the release rod not properly beeing seated? Thanks for your input, 1997 650 sportsman

User avatar
Darkblood
Order of Suvarov
Order of Suvarov
Posts: 3229
Joined: Sat Jan 29, 2011 7:32 pm
Location: Smithfield, Maine, now further into (Americas Siberia)

Re: Clutch Squeel

Post by Darkblood » Mon Jun 01, 2020 4:58 pm

Check the throwout bearing should be between the rod and the plunger. Sometimes the bearing disintergrate...
2010 Gear Up. named феникс (phoenix)

Post Reply