Request: 2017 Rear caliper(s) piston bore dimension

Woe unto you that bought the first model year of a major remake, perhaps this section can help address any 2014 and later model Ural "imperfections". Here's a special section for folks with the latest rigs to discuss 2014 and later model-related topics such fuel injection, 3-wheel disc brakes, hydraulic steering dampers, spin-on oil filters and other anomalies that don't belong on true Russsian motorcycle ;-P We've gone from using big hammers and greasy wrenches to needing computers and Ouija boards in order to fix our rigs.
Forum rules
Please keep this section specific to issues pertaining to 2014 and later models such as fuel injection, sidecar and rear disc brakes and so forth. Ask general or non-2014 and later specific questions in the main Hammerin' & Wrenchin' section.
Post Reply
User avatar
Black_Magic
Comrade
Comrade
Posts: 33
Joined: Tue Aug 28, 2018 5:35 pm
Location: Dayton, Ohio

Request: 2017 Rear caliper(s) piston bore dimension

Post by Black_Magic » Sun Aug 18, 2019 10:05 pm

I have an idea rolling around in my head and need to get some numbers...

Does anyone have a caliper off that they can measure - car and pusher if possible?

Mine is going to be away for some work for the week.
2017 Gear Up - Urban Camo
2:1 High Right side Hindle exhaust.
Kaleb winch mount + Harborfreight wireless winch.
Dog restraints.

2012 Yamha Super Tenere

User avatar
Black_Magic
Comrade
Comrade
Posts: 33
Joined: Tue Aug 28, 2018 5:35 pm
Location: Dayton, Ohio

Re: Request: 2017 Rear caliper(s) piston bore dimension

Post by Black_Magic » Wed Sep 04, 2019 6:03 pm

Got the bike back from service, pulled the rear caliper to measure the piston and found I was a whole lot lower on brake pads than I realised.

Anyhow Piston is 38mm.
2017 Gear Up - Urban Camo
2:1 High Right side Hindle exhaust.
Kaleb winch mount + Harborfreight wireless winch.
Dog restraints.

2012 Yamha Super Tenere

Post Reply