Search found 177 matches

by nemec
Sat Apr 07, 2012 4:55 pm
Forum: Oil Threads
Topic: Oil change interval with Full Synthetic?
Replies: 29
Views: 6199

Re: Oil change interval with Full Synthetic?

I use Amsoil and found that at 2,500km it was still damn near clean so I've gone to 5,000km. Supposedly the new Urals now recommend 5,000km even with dino. I guess if you follow the synth manufacturers' recommendations you could go a lot more than 5,000km, but I haven't heard of many folks who do t...
by nemec
Tue Feb 21, 2012 6:48 pm
Forum: Ride Reports
Topic: Short snow ride
Replies: 12
Views: 1377

Re: Short snow ride

Here you can find pictures of Michal´s exhaust system - http://veverka.boruvkova.cz/foto/files/vyfuky/ it cost him about 320 dollars - it is Michal´s project and it made local czech company Creptus exhaust system for him. I like what Michal do with his bike, I will never drive terrains like he do :)...
by nemec
Wed Feb 08, 2012 4:37 pm
Forum: The Virtual Watering Hole
Topic: Czech Ural video
Replies: 10
Views: 1092

Re: Polish Ural video

it is not polish, it is czech lenguage, but I understand - for you the same :)
it is french document - Ural Legend - http://www.grandangledistribution.com/g ... 1&Itemid=2
by nemec
Mon Jan 23, 2012 9:37 pm
Forum: The Virtual Watering Hole
Topic: 2 wd questions
Replies: 20
Views: 3081

Re: 2 wd questions

Check your tread depht. if sidecar wheel tread is deeper 2Wd will pull you left in snow - better traction for this wheel. ural is a great bike for snowy roads. on these roads i am finally faster than cars, drifting is really easy and fun. if i am driving solo i load on sidecar about 30-50kg of any m...
by nemec
Thu Jan 05, 2012 8:13 pm
Forum: Ural/Dnepr 101 - Newbie Questions
Topic: "IMZ": what the heck is "zavod"?
Replies: 17
Views: 1605

Re: "IMZ": what the heck is "zavod"?

It Factory is one Producing building Then zavod is area/complex of offices,development, montage etc. not only one building. but..my czech vocabulary write it is concern,factory,plant,works so you can choose :D
by nemec
Thu Jan 05, 2012 3:52 pm
Forum: Modifications & Accessories
Topic: Goosi carb needles, one of mine was phucked.........
Replies: 231
Views: 11601

Re: Goosi carb needles, one of mine was phucked.........

If i tryed to take off spin and change its position it was too free. So i let one clip and "tune" with shims not with moving clips. After 7000km I have not seen any wear - but I will look on clips, I am a little bit worry about it :) Have you heard about KPZ4 keihin needle? it is called "alternative...
by nemec
Sun Oct 23, 2011 10:21 am
Forum: Ride Reports
Topic: Ural - Golubina - movie
Replies: 13
Views: 1677

Re: Ural - Golubina - movie

No no, I am not in the video :) I have only posted it here.
I like roads or "light" terrain, love snowy roads,but not such these hard work trips - but I like watching it :D

I am sorry, don´t know, what country they were.
by nemec
Sat Oct 22, 2011 5:53 am
Forum: Ride Reports
Topic: Ural - Golubina - movie
Replies: 13
Views: 1677

Re: Ural - Golubina - movie

cdscoot wrote:Where are you Nemec?
I am not sure what do you mean
Location - still middle/east europe :)
by nemec
Fri Oct 21, 2011 6:48 am
Forum: Ride Reports
Topic: Ural - Golubina - movie
Replies: 13
Views: 1677

Ural - Golubina - movie

Second part of "trilogy" Czech dnepr/ural group. you can download movie here - http://ural.cz/download/video/golubina.mpg or youtube - http://www.youtube.com/watch?v=nvg4q8Ln4AE If you did not see first part - Bagnuvatě, here it is - http://ural.cz/download/video/bagnuvate.mpg or youtube - http://ww...
by nemec
Sat Apr 09, 2011 5:35 pm
Forum: The Virtual Watering Hole
Topic: Sidecar crashes
Replies: 30
Views: 4341

Re: Sidecar crashes

:)
by nemec
Fri Feb 25, 2011 3:51 am
Forum: The Virtual Watering Hole
Topic: Sidecar crashes
Replies: 30
Views: 4341

Re: Sidecar crashes

VWK75S - no it was not me :lol:

here is another one - at the end of video -
by nemec
Thu Feb 24, 2011 1:47 pm
Forum: The Virtual Watering Hole
Topic: Sidecar crashes
Replies: 30
Views: 4341

Re: Sidecar crashes

:)
by nemec
Mon Feb 07, 2011 7:55 am
Forum: General Hammerin' and Wrenchin' (all model years)
Topic: Shims are In....2010 Ural-T
Replies: 8
Views: 1388

Re: Shims are In....2010 Ural-T

with my 2008 ural different needles work much more better than shimmed original needles.
lower consumption, better performance
with original shimmed needles mixture was too rich
without shims it was too lean in low range
by nemec
Sat Feb 05, 2011 2:38 am
Forum: General Hammerin' and Wrenchin' (all model years)
Topic: Did your FD die? Check in here.
Replies: 107
Views: 10902

Re: Did your FD die? Check in here.

I must correct something - I thought IMWA = Irbit, but it is "only" your local american dealer.
sorry for my mystification replies in this thread, I thought Irbit, but I wrote - IMWA
:oops:
by nemec
Sat Feb 05, 2011 2:11 am
Forum: The Virtual Watering Hole
Topic: Cool video
Replies: 3
Views: 703

Re: Cool video

I like these videos :) here are another.. Two Wheels 2 Anywhere - Ural of NE http://www.youtube.com/watch?v=8dMYsGK_gDk This one propably you will not understand - but..it is about ural :lol: http://www.youtube.com/watch?v=RTPpF1h3BGk And french reportage http://www.youtube.com/watch?v=o3ry21XJEVM :...